Your motorcycle's power depends on the ability for it to get clean, fresh air into its intake.

Increase Horsepower - for ®Harley Davidson air cleaner and experience more horsepower and torque.

The air cleaner is a critical part of your motorcycle's power and performance. By replacing the harley stock air filter element with the PowerPACC by Doherty Machine on their harley test bike, EasyRiders Magazine was able to increase the bike's power by 10.4 horsepower. It was also noted that the bike, a Harley Davidson™, acquired an extra 6.1 foot pounds of torque.

With the PowerPACC you can acheive more power for your harley by removing the stock motorcycle air cleaner, its cover, the filter and the breather lines. Insert a few nylon washers, bolts, and O-ring and the air cleaner and you are done in about a half an hour. It's simple and will make a world of difference for your bike's performance.

According to the authors of Performance Tech at American Rider, after installing the PowerPACC unit on a 2003 Deuce, the bike now responds with more quickness and crispness to the throttle. The official statement was that "it just feels more peppy".

The folks at V-Twin Magazine have stated that the Doherty air cleaner - the PowerPACC is unique because they introduce a velocity stack inside the filter element the filtered air is smoothed out before it enters the throttle bore.

Now you have a denser air stream in the intake track and the breather design keeps the dirty engine crankcase air away from the the intake air. Screaming Eagle

Back to Home Page
Categories
Bagger Parts
Billet Cam Covers
O2 Sensor Bungs and Plugs
V-Rod Components
Stainless Steel Hardware
Fat 200 Wide Tire Kits
  FAT 200 » Complete Set
  FAT 200 » Front Fenders
  FAT 200 » Front Wheel
  FAT 200 » Hardware
  FAT 200 » Rear Fenders
  FAT 200 » Rear Tires
  FAT 200 » Rear Wheels
  Low Dollar Fat 200
MystFree
Phantom Oil Filters
Power PACC
Power Vents
Turbo Systems
Wheel Spacers
Manufacturers

Magazine Articles

Shopping CartLogin My Account sales@dohertymachine.com Dealer Login  
Fat 200 Wide Tire Kits

No Hassle, Bolt-On – 200 Rear Tire Conversion

Read EasyRiders Fat200 Install Article

FAT 200 Complete conversion kits and components allow the installation of a 200x18 series tire onto any 1987-2004 Harley-Davidson Softail motorcycle using the stock factory swing arm.

FAT 200 Complete Standard Kits include everything necessary to successfully install a 200 tire and ride the bike. Rear fenders except stock seat pan shapes and require the removal of the factory fender strut rails.

All Fat 200 kits are pre-fit on actual Harley Davidson frame fixtures

FAT 200 Complete Gear Sets include everything necessary except the wheel.

FAT 200 Complete conversion kits and components allow the installation of a 200x18 series tire onto any 1987-2004 Harley-Davidson Softail motorcycle using the stock factory swing arm.

FAT 200 Complete Standard Kits include everything necessary to successfully install a 200 tire and ride the bike. Rear fenders accept stock seat pan shapes and require the removal of the factory fender strut rails.

FAT 200 Complete Gear Sets include everything necessary except the wheel. All components in kits are of premium quality and engineered and manufactured in America. Average installation time is approximately 6-8 hours plus paint.

FAT 200 » Complete Set FAT 200 » Front Fenders
FAT 200 » Front Wheel FAT 200 » Hardware
FAT 200 » Rear Fenders FAT 200 » Rear Tires
FAT 200 » Rear Wheels Low Dollar Fat 200
Shipping & Returns     |    Warrantees & Conditions     |     Contact Us     |     Printable Catalog     |     User Forums